Amana MV-194S Owner'S Manual Download Page 26 | Manualshive

Page: 26 / 46

background image

- 26 -

OPERATION

TURNTABLE ON/OFF

For best cooking results, leave the
turntable on. It can be turned off for
large dishes. Press TURNTABLE
ON/OFF to turn the turntable on or off.

NOTE: • Sometimes the turntable can become hot

to touch.

Be careful touching the turntable

during and after cooking.

NOTE:

• Do not run the oven empty.

FAN HI LOW OFF

The FAN moves steam and other
vapors from the cooking surface.
Touch FAN once for High fan speed,
twice for Low fan speed, or three
times to turn the fan off.

NOTE:

If the temperature gets too hot around the

microwave oven, the fan in the vent hood will
automatically turn on at the LOW setting to cool the
oven. It may stay on up to an hour to cool the oven.
When this occurs,

You can not turn the vent fan off.

CHILD LOCK

You may lock the control panel to prevent the
microwave from being accidentally started or used by
children.
The Child Lock feature is also useful when cleaning
the control panel. Child Lock prevents accidental
programming when wiping the control panel.

1. Touch

STOP/CLEAR

pad.

2. Touch and hold

0

pad more

than 4 seconds.

LOCKED

will appear in the display
window with two beeps.

Example: To set the child lock.

1. Touch and hold

0

pad more

than 4 seconds.

LOCKED

will disappear and you hear
two beeps. At this time the
oven is ready.

Example: To cancel the child lock.

LIGHT HI LOW OFF

Touch

LIGHT

pad once for bright

light, twice for night light, or three
times to turn the light off.

LIGHT TIMER

You can set the LIGHT to turn on and off automatically
at any time you want. The light comes on at the same
time every day until reset.

1. Touch

LIGHT TIMER

pad.

(Press once for AM,

twice for PM.)

2. Enter the time you want

the LIGHT to turn on.

3. Touch

LIGHT TIMER

pad

again.
(Press once for AM,

twice for PM.)

4. Enter the time you want

the LIGHT to turn off.

5. Touch

START

pad.

Example: Turn on 2:00 AM, turn off 7:00 AM.

1. Touch

LIGHT TIMER

pad.

2. Touch

STOP/CLEAR

pad.

NOTE:

To reset that time to turn on and off the
LIGHT, repeat steps 1 to 5.

Example: To cancel the LIGHT TIMER.

NOTE:

If you want to cancel the LIGHT TIMER in

operation, you should touch key.

«
...
24
25
26
27
28
...
»

Summary of Contents for MV-194S















































Reviews:

No comments

Related manuals for MV-194S

Brand: NEFF Pages: 40

B57CR23 0B Series

Brand: NEFF Pages: 48

Brand: GE Pages: 2

Brand: Toastmaster Pages: 12

Brand: Daewoo Pages: 23

Brand: Pelgrim Pages: 76

Brand: NEFF Pages: 40

Brand: Parmco Pages: 18

Brand: Bartscher Pages: 88

Brand: Hyundai Pages: 25

Brand: Maytag Pages: 12

Brand: Oster Pages: 24

Brand: NEFF Pages: 68

Brand: TurboChef Pages: 16

Brand: DAEWOO ELECTRONICS Pages: 32

Brand: GE Pages: 16

Brand: Orbegozo Pages: 36

Brand: Panasonic Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands