
www.amanacommercial.com
Part No. 12474310/3828W5A2495
Printed in Korea
Amana, Iowa 52204
Read “Important Safety Information” before using “Quick
Reference Instructions”. If there are unanswered
questions, see detailed sections of this manual.
Interrupting Operation
• Open oven door to interrupt operation. Oven fan
continues to operate. Close door and press
START pad to resume oven operation. Display
continues to show countdown time. Press
START pad
to resume oven operation and countdown timing.
Canceling Mistakes
• If oven is operating, press
STOP/RESET pad once to
stop oven, then again to clear display.
• If oven door is open and time shows in display, close
oven door and press
STOP/RESET pad to clear
display.
Operating Preprogrammed Pads
1.
Open oven door, place food in oven, and close oven
door.
2.
Press desired number pad(s).
3.
Oven stops heating and oven signal sounds when
heating timing elapses.
Manual Time Entry
1.
Open oven door, place food in oven, and close door.
2.
Press
TIME ENTRY pad.
3.
Press number pads to enter desired cooking time.
4.
Press desired power level pad to change power level.
5.
Press
START pad.
6.
Oven stops heating and oven signal sounds when
heating timing elapses.
Quick Reference Instructions
Preprogrammed Number Pads
1.
Open oven door.
2.
Press and hold pad
1 for approximately 5 seconds.
3.
Press desired number pad.
4.
Press number pads to enter desired cooking time.
5.
Press desired power level pad to change power level.
6.
Press
START pad to save new heating time and
power level in oven memory.
7.
Press
STOP/RESET pad or close oven door to exit
programming mode.
Multiple Heating Stages
1.
Open oven door.
2.
Press pad
1 for approximately 5 seconds.
3.
Press desired number pad.
4.
Press number pads to enter desired cooking time.
5.
Press desired power level pad to change power level.
6.
Press
TIME ENTRY pad.
7.
Press
START pad to save new heating time and
power level in oven memory.
8.
Press
STOP/RESET pad or close oven door to exit
programming mode.
2002 Amana Commercial Products
Summary of Contents for LD10MP
Page 19: ...19 ...