background image

11

V. For More Information

Most questions can be answered by the local Amana dealer. Check with dealer first if needing any further information
regarding the operation, maintenance, or service of the furnace.

If you have any matters that are not resolved locally, or for more information on other heating and cooling products or
kitchen appliances offered by Amana is needed - please call:

CONSUMER INFORMATION LINE

AMANA TOLL FREE

1-800-843-0304 (U.S. only)

(Not a technical assistance line for dealers.)

________________________________________

Outside the U.S., call 1-319-622-5511.

(Not a technical assistance line for dealers.)

Your telephone company will bill you for the call.

Ask a participating Amana dealer about Amana's extended service plan. It adds to the strong warranty with
additional parts and labor coverage.

To obtain the proper labels, the Model, Manufacturing Number and Serial Number of the unit must be supplied.
These numbers are recorded on the nameplate of the furnace. For convenience, record this information here:

MODEL NUMBER: _ _ _ _ _ _ _ _ _ _
MANUFACTURING NUMBER: P _ _ _ _ _ _ _F
SERIAL NUMBER: _ _ _ _ _ _ _ _ _

Summary of Contents for GDC Series













Reviews: