5
7.
Remove toe grille and bottom hinge cover. Both snap
off.
8.
Remove bottom hinge and shim using hex nut driver.
5/16" screws
Top hinge
Phillips screws
Center hinge
pin
Center hinge
bracket
9/32" hex nut
Center hinge
3/8"
screws
Bottom hinge
Door closure
9.
Reverse doors by performing the following steps:
• Replace bottom hinge and shim on opposite side
of cabinet.
• Remove screws from center mullion. Place screws
in holes left when center hinge bracket was
removed. Rotate center hinge bracket 180° and
install center hinge bracket on opposite side of
cabinet with hinge screws. Reuse plastic hinge pin
washers.
• Place refrigerator door on bottom hinge. Install
center hinge pin in center hinge bracket. Place
door closure on center hinge pin.
• Remove plugs from top of refrigerator cabinet.
Replace plugs in holes left when top hinge was
removed. Remove hinge hole cover from freezer
door. Replace on opposite side of freezer door.
• Place freezer door on center hinge and door
closure. Install top hinge and shims on opposite
side of cabinet using hex nut driver. Snap hinge
cover in place on hinge.
• Use a penny at top to space door
3
/
4
" (19 mm)
from cabinet. Make sure handle side of door is
1
/
8
" (3 mm) higher than hinge side of door before
tightening top hinge screws.
3/4" (19 mm)
1/8" (3 mm)
10. Remove plugs from side of refrigerator and freezer
doors.
Remove
plugs
Install
plugs here
11. Mount freezer handle on opposite side of refrigerator
door using mounting screws previously removed.
Snap end cap(s) into place.
12. Mount refrigerator handle on opposite side of freezer
door using mounting screws previously removed.
Snap end cap(s) into place.
13. Replace plugs in empty side mounting holes on
refrigerator doors.
14. Proceed to
Leveling Refrigerator procedures for final
placement of refrigerator.
Connect Ice Maker Water Supply Line
(Some models)
CAUTION
!
To avoid property damage, protect soft vinyl or other
flooring with cardboard, rugs, or other protective
materials when moving refrigerator. Make sure
stabilizing leg is raised before moving refrigerator.
Raise stabilizing leg by turning counterclockwise.