15
RS2230003 Rev. 1
Operation
Operating Preprogrammed Pads
Equipment has 2 menus with 10 preprogrammed number
pads.
1. Open oven door, place food in oven, and close oven
door.
• Display shows “b” or “d” and “READY”.
• Fan and light operate.
• If pad is not pressed in 30 seconds, open and
close oven door again.
2. Press
MENU b/d pad to select preprogrammed menu.
• “b” or “d” shows in display.
3. Press desired number pad.
• Oven operates and time counts down.
• Display shows heating time, “POWER”, ”COOK
LEVEL”.
• Display shows “POWER” only when microwave
energy is present.
• If power level other than 100 percent power was
programmed, display shows “COOK LEVEL” and
power level. Display counts down cooking time.
• If additional heating time is required, press
preprogrammed pads before or after heating cycle
ends.
4. Oven stops heating and oven signal sounds when
heating timing elapses.
Power-up Display
After equipment is plugged in, display shows 4 large
dashes and 1 small dash. Open and close oven door to
clear display and activate pads.
Interrupting Operation
• Open oven door to interrupt operation. Oven fan
continues to operate. Close door and press
START pad to resume oven operation.
• Press
STOP/RESET pad to interrupt operation.
Display continues to show countdown time. Press
START pad to resume oven operation and countdown
timing.
Canceling Mistakes
• If oven is not operating, press
STOP/RESET pad to
clear display.
• If oven is operating, press
STOP/RESET pad once to
stop oven, then again to clear display.
• If oven door is open and time shows in display, close
oven door and press
STOP/RESET pad to clear
display.
Preprogrammed Times and Cook Level
All preprogrammed pads arrive set at full power. Menus
“b” and “d” are programmed identically at factory.
Pads
Heating Times
1
10 seconds
2
20 seconds
3
30 seconds
4
45 seconds
5
1 minute
6
1 minute 30 seconds
7
2 minutes
8
3 minutes
9
4 minutes
0
5 minutes
