Amana ASX14, Specifications

Page: 3 / 36

p
rodUCt
S
peCifiCAtionS
p
rodUCt
S
peCifiCAtionS
2 www.amana-hac.com SS-ASX14
SS-ASX14 www.amana-hac.com 3
S
peCifiCAtionS
ASX14
0181D ASX14
0241C
ASX14
0301C
ASX14
0361C
ASX14
0421D ASX14
0481B ASX14
0481C
ASX14
0601B
Cooling Capacity
Nominal Cooling (BTU/h) 18,000 24,000 28,800 34,600 40,000 45,000 46,000 56,800
Decibels 70 71 72 73 73 74 74 75
Compressor
RLA 9.0 13.5 12.8 14.1 16.7 19.8 19.9 26.4
LRA 48.0 58.3 64.0 77.0 79.0 109.0 109.0 134.0
Condenser Fan Motor
Horsepower (RPM)
⅛ ¹⁄₁₂ ¹⁄₆ ¹⁄₆ ¹⁄₆ ¼ ¼ ¼
FLA 0.70 0.60 1.10 0.90 0.90 1.60 1.50 1.60
Refrigeration System
Refrigerant Line Size¹
Liquid Line Size (“O.D.)
⅜" ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" ⅜"
Suction Line Size (“O.D.)
¾" ¾" ¾" ⅞"
1
⅛"
1
⅛”
1
⅛”
1
⅛”
Refrigerant Connection Size
Liquid Valve Size (“O.D.)
⅜" ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" ⅜"
Suction Valve Size (“O.D.)
¾" ¾" ¾" ⅞" ⅞" ⅞" ⅞" ⅞"
Valve Connection Type Sweat Sweat Sweat Sweat Sweat Sweat Sweat Sweat
Refrigerant Charge 70 88 93 98 120 183 147 268
Shipped with Orifice Size 0.052 0.055 0.065 0.068 0.070 0.079 0.078 0.088
Electrical Data
Voltage-Phase 208/230-1 208/230-1 208/230-1 208/230-1 208/230-1 208/230-1 208/230-1 208/230-1
Minimum Circuit Ampacity ² 12 17.5 16.9 18.5 21.8 26.4 26.4 34.6
Max. Overcurrent Protection ³ 20 30 25 30 35 45 45 60
Min / Max Volts 197 / 253 197 / 253 197 / 253 197 / 253 197 / 253 197 / 253 197 / 253 197 / 253
Electrical Conduit Size
Power Supply
½”
or
¾” ½”
or
¾” ½”
or
¾ ” ½”
or
¾” ½”
or
¾” ½”
or
¾” ½”
or
¾” ½”
or
¾”
Low Voltage
½" ½" ½" ½" ½" ½" ½" ½”
Equipment Weight (lbs) 141 144 162 154 188 220 220 290
Ship Weight (lbs) 178 161 180 172 184 242 242 312
¹ Line sizes denoted for 25’ line sets, tested and rated in accordance with AHRI Standard 210/240. For other line-set lengths or sizes, refer
to the installation & Operating instructions and/or the long line-set guidelines.
² Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes
³ Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
Notes
• Always check the S&R plate for electrical data on the unit being installed.
• Unit is charged with refrigerant for 15’ of ⅜” liquid line. System charge must be adjusted per Installation Instructions Final Charge Procedure.