7
Freezer door
1.
Remove door hinge hole plug from freezer door. Move to
opposite side hinge hole as shown. See Graphic 3.
2.
Remove door stop. Move to opposite side of refrigerator door
as shown. See Graphic 4.
3.
Set aside door until hinges and refrigerator compartment door
are in place.
Refrigerator door
1.
Remove door hinge hole plug from refrigerator door. Move to
opposite side hinge hole as shown. See Graphic 3.
2.
Remove door stop. Move to opposite side of refrigerator door
as shown. See Graphic 4.
3.
Set aside refrigerator door until bottom hinge is installed on
refrigerator.
Replace Doors and Hinges
NOTE:
Graphic may be reversed if door swing is reversed.
1.
Replace the parts for the bottom hinge as shown. Tighten
screws. Replace the refrigerator door.
NOTE:
Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
2.
Assemble the parts for the center hinge as shown and tighten
all screws. See Center Hinge graphic. Replace the freezer
door.
3.
Assemble the parts for the top hinge as shown. See Top Hinge
graphic. Do not tighten screws completely.
4.
Line up the doors so that the bottom of the freezer door aligns
evenly with the top of the refrigerator door. Tighten all screws.
Final Steps
1.
Check all holes to make sure that hole plugs and screws are in
place. Reinstall top hinge cover. See Top Hinge graphic.
2.
Plug into a grounded 3 prong outlet.
3.
Reset the controls. See “Using the Control(s).”
4.
Return all removable door parts to doors and the food to the
refrigerator.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
