background image

3

SAVE THESE INSTRUCTIONS

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE

TO EXCESSIVE MICROWAVE ENERGY

A.

DO NOT

 attempt to operate this oven with the door open since open door operation can result in harmful

exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.

B.

DO NOT

 place any object between the oven front face and the door or allow soil or cleaner residue to

accumulate on sealing surfaces.

C.

DO NOT

 operate the oven if it is damaged. It is particularly important that the oven door close properly and

that there is no damage to the:

1.

door (bent)

2.

hinges and latches (broken or loosened)

3.

door seals and sealing surfaces.

D. The oven should not be adjusted or repaired by anyone except properly qualified service personnel.

1.   READ all instructions before using equipment.

2.   READ AND FOLLOW the specific

“PRECAUTIONS TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE
ENERGY” on this page.

3.   This equipment MUST BE EARTHED. Connect

only to properly EARTHED outlet. See
“EARTHING INSTRUCTIONS” on page  5.

4.

Install or locate this equipment ONLY in
accordance with the installation instructions in
this manual.

5.

Some products such as whole eggs and sealed
containers—for example, closed glass jars—are
able to explode and SHOULD NOT be HEATED
in this oven.

6.

Use this equipment ONLY for its intended use as
described in this manual. Do not use corrosive
chemicals or vapors in this equipment. This type
of oven is specifically designed to heat, cook, or
dry food. It is not designed for industrial or
laboratory use.

7.

As with any equipment, CLOSE SUPERVISION
is necessary when used by CHILDREN.

8.

See door cleaning instructions on page 12 of this
product safety manual.

9.

DO NOT heat baby bottles in oven.

10. Baby food jars shall be open when heated and

contents stirred or shaken before consumption, in
order to avoid burns.

11. DO NOT operate this equipment if it has a damaged

cord or plug, if it is not working properly, or if it has
been damaged or dropped.

12. This equipment, including power cord, must be

serviced ONLY by qualified service personnel.
Special tools are required to service equipment.
Contact nearest authorized service facility for
examination, repair, or adjustment.

13. DO NOT cover or block filter or other openings on

equipment.

14. DO NOT store this equipment outdoors. DO NOT

use this product near water – for example, near a
kitchen sink, in a wet basement, a swimming pool,
or a similar location.

15. DO NOT immerse cord or plug in water.

16. Keep cord AWAY from HEATED surfaces.

17. DO NOT let cord hang over edge of table or counter.

18. For commercial use only.

!

WARNING

When using electrical equipment, basic safety precautions should be followed to reduce the risk of burns,
electrical shock, fire, or injury to persons.

IMPORTANT SAFETY INSTRUCTIONS

   Recognize this symbol as a SAFETY message

Summary of Contents for ALD10D













Reviews: