background image

INSTALLATION INSTRUCTIONS

30" (76.2 CM) FREESTANDING GAS RANGES

W10860789A

IMPORTANT:

 

Save for local inspector's use.

Installer:

 Leave installation instructions with the homeowner.

Homeowner:

 Keep installation instructions for future reference.

Table of Contents

RANGE SAFETY .............................................................................2
INSTALLATION REQUIREMENTS  ................................................
3

Tools and Parts .............................................................................3
Location Requirements ................................................................4
Electrical Requirements ...............................................................5
Gas Supply Requirements ...........................................................6

INSTALLATION INSTRUCTIONS  ..................................................7

Unpack Range..............................................................................7
Install Anti-Tip Bracket .................................................................7
Make Gas Connection .................................................................8
Verify Anti-Tip Bracket Is Installed and Engaged ........................9
Level Range ................................................................................10
Electronic Ignition System .........................................................10
Complete Installation .................................................................12

GAS CONVERSIONS  ...................................................................12

LP Gas Conversion ....................................................................12
Complete Conversion ................................................................14
Natural Gas Conversion .............................................................14
Complete Conversion ................................................................16

Summary of Contents for AGR5330BAB

















Reviews: