background image

13

COIL ELEMENTS (on some models)

Cleaning Method:

 

Damp cloth: 

Make sure control knobs are OFF and elements are cool.

Do not clean or immerse in water. Soil will burn off when hot.

BURNER BOWLS (on some models)

Before removing or replacing coil elements and burner 

bowls, make sure they are cool and the control knobs are in the 

Off position.
Remove the coil element by pushing the edge of the coil element 

toward the receptacle. Lift it enough to clear the burner bowl. 

Pull the coil element straight away from the receptacle to remove. 

Lift out the burner bowl.

Cleaning Method:
Chrome burner bowls

Wash frequently in warm, soapy water. (It is not recommended to 

wash chrome bowls in a dishwasher.) A mild abrasive cleaner and 

a plastic scrubber can be used to remove stubborn stains.
For heavily soiled bowls, place an ammonia-soaked paper towel 

on the stains and allow to soak for a short time, then gently scrub 

with a plastic scrubber.

SURFACE UNDER COOKTOP (on some models)

The coil cooktop will lift up to provide easy access for cleaning 

beneath. Lift the cooktop by both front corners until the support 

locks into place.

Cleaning Method:

 

Glass cleaner, mild liquid cleaner or nonabrasive 

scrubbing pad.

 

affresh

®

 Kitchen and Appliance Cleaner Part Number 

W10355010 (not included): 

See the “Accessories” section for more information.

To avoid damage to the range, do not remove the cooktop.

OVEN RACKS
Cleaning Method:

 

Steel-wool pad

 

For racks that have discolored and are harder to slide, 

a light coating of vegetable oil applied to the rack guides 

will help them slide.

STORAGE DRAWER (on some models)

Check that storage drawer is cool and empty before cleaning.

Cleaning Method:

 

Mild detergent

OVEN CAVITY

Do not use oven cleaners on models with Self-Clean.
Food spills should be cleaned when oven cools. At high 

temperatures, foods react with porcelain. Staining, etching, 

pitting, or faint white spots can result.

Cleaning Method:

 

See “Self-Cleaning Cycle” section.

Oven Light

The oven light is a standard 40-watt appliance bulb. Before 

replacing, make sure the oven and cooktop are cool and the 

control knobs are in the Off position.

To Replace:

1. 

Unplug range or disconnect power.

2. 

Turn the glass bulb cover in the back of the oven 

counterclockwise to remove.

3. 

Turn bulb counterclockwise to remove from socket.

4. 

Replace bulb, then bulb cover by turning clockwise.

5. 

Plug in range or reconnect power.

Summary of Contents for 5509105

















Reviews: