Amadas M2120A Manual Download Page 9 | Manualshive

Page: 9 / 130

Amadas M2120A Manual Download Page 9

Welcome
To
AMADAS
Industries

With origins dating back to 1963, AMADAS
Industries and its predecessors have a long
history of providing high quality, reliable, and
innovative equipment for the farming industry.
AMADAS equipment is currently at work
throughout the United States and in many
other countries. This equipment ranges from
the Self-Propelled Peanut Combine, Tree Bark
Processing and Packaging Machinery, Hi-
Speed Cotton Stalk Puller/Chopper, Reel Rain
Traveler Irrigation Systems, to the M2120A
Pull-Type Peanut Combines.

Thank you for choosing AMADAS Industries.

We are strongly committed to your satisfaction

and safety. Our goal is for you to be satisfied

with our machinery for many years and it is our
hope that you will choose AMADAS again for
your equipment needs.

We are confident you will experience many good

years of service with your AMADAS combine.
If any need should arise, we pledge the best
efforts of our people and dealers to assist you.

One of the most important factors to both safety
and maximum performance is for every machine
operator to understand thoroughly the safe
operation of this equipment. Please invest the
time to read this manual to ensure that injuries
are prevented and to receive the maximum
productivity from your AMADAS machine.

11/2/18

Introduction

M2120A PT Peanut Combine

MAN152

vii

«
...
7
8
9
10
11
...
»

Summary of Contents for M2120A



































































































































Reviews:

No comments