• Check package contents against supplied parts and hardware list to assure that all
components were received undamaged. Do not use damaged or defective parts. lf you
require replacement parts, please contact amada customer service at
• Carefully read all instructions before attempting installation. If you do not understand the
instructions or have any concerns or questions, please contact customer service at
• Not all parts and hardware included will be used.
• Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use. Thank you for your understanding.
IMPORTANT SAFETY INFORMATION
Tools Needed (Not lncluded)
Stud Finder
Bracket
(A) x3
Board
(B) x3
Long Lag Screw
M4x50mm
(C) x6
Short Lag Screw
M4x30mm
(D) x15
Screw
M4x20mm
(E) x6
Pencil Screwdriver
Level
Drill
5/64 in.(2mm)
Wood Drill
15/64 in.(6mm)
Concrete Drill
Supplied Parts and Hardware
Wall Anchor
13x42mm
x15
F
CAUTION!
These wall anchors [F]
are for drywall ONLY.
DO NOT use them in
concrete / brick / wood
studs wall.
CAUTION!
These anchors are for
concrete or brick
walls ONLY. DO NOT
use them in drywall
or wood studs.
x15
G
Wall Anchor
M6x30mm
Before installation, please identify your wall type.
For wood stud installation, follow the step 1A.
For drywall installation, follow the step 1B.
For solid concrete and concrete block walls installation, follow the step 1C
Step 1 Secure Bracket to Wall
Hammer
01
Step 1A
For Wood Stud
Step 1B
For Drywall
2 in.(50mm)
For Long Lag Screw
ø5/64 in.(ø2mm)
[Not Included] [Optional]
02
For wood stud mounting, wall
anchors [F] and [G] are not
necessary.
WARNING:
X X
F
G
D
F
C
D
F