10
2) Install the housing to the weld head.
(Fig. 5)
Adjust the direction of the housing after
installed.
NOTE:
- Do not let the housing make a whole turn
when adjusting the direction of it. (Fig. 6)
(Fig. 5)
(Fig. 6)
3) Fasten the housing nut using a hook-shaped
spanner wrench to fix the housing.
NOTE:
- Be careful not to catch fingers in it.
- Hold a hook of a spanner wrench firmly to
fit to the nut when loosening the nut. (Fig. 7)
4) Fix it with the set screw at the side of
the weld head.
(Fig. 7)
5) Install the pressure spring, the slide unit
ASSY, and the load cell.
NOTE:
- Attach the nylon clip for fixing the cable to
the load cell using a machine screw of M4x6
and a flat washer. Make sure that the machine
screw does not protrude from the inside wall of
the housing.
(Fig. 8)
