AM.PM Sensation W30A-170-075W-A, Manual

Page: 3 / 16

3
English
Before using, it is necessary to connect
to the sewer (the device drain-overflow
is not included into delivery set).
To prevent moisture under the bath, the
joints between the bath and the wall
must be sealed with sanitary silicone.
Fill the bath by ¾ of the volume and seal
the joints between bath and the wall
with a silicone sealant (not included in
delivery set). It is better to use sealant
that meets the properties of PH-
neutrality, colorlessness.
Attention! Sealant needs some time to
harden. It is forbidden to use item within
24 hours after installation.
In the case if installation of a bathtub or
installation near the bathtub wares in
such a way to the bath for maintenance
and repair will be limited, work to ensure
should be payed by the consumer!
Product
maintenance
Attention!
For correct operation of the system
it is required to install puriification
filters at feed pipelines with degree of
purification of 100-300 micron.
• For the avoidance of damage of the
surface of the product it is not allowed
to use water of temperature more
than 60°С.
• Use only mild detergents and soap for
cleaning of the item.
• Do not use corrosive washing agents or
abrasive pastes for cleaning of the item.
• Accute contamination on the surface
is reccomended to treat with diluted
vinigar and wash off with water.
• Shallow scratches (for acrylic parts
of the item) can be removed with fine
grid sandpaper (grade 2000).
Producer has a right to introduce
change of component parts that has
no effect on appearance and functional -
ity of product. All parameters indicated
in this instruction have formal meaning.
Producer reserves the right for technical
changes.