January 1st 14
14
Maintenance
The round bale self-loader is designed to
save energy, time and money, take care of it,
protect your investment
5) Check the tightness of all nuts once a year.
If necessary, tighten according to the table.
1) Wipe out the grease with a clean cloth
before performing lubrication, to avoid
introducing dirt or sand
6) Check the tightness of the wheel nuts after
the first 5 hours of use and then every 50
hours of operation.
2)
Repair or replace broken greasers.
7) Check the tire pressure after every 50
hours of operation. Adjust as mentioned on
the tire
3) Lubricate all les greasers after every 20 hours of
operation.
8) Keep your equipment clean, it is a good habit.
4)
Disassemble, clean and lubricate the roller
bearings hubs once a year.
Summary of Contents for TAC-14
Page 2: ...January 1st 14 2 ...
