8
ENGLISH
Charging
Connect one end of the USB cable into the port at the bottom of the screwdriver and the
second to the USB port of your laptop. You can also connect to a 240V/100V AC power adapter
(not included) and then plug in to a properly earthed electrical socket.
While the battery is charging, the indicator light glows red. When the signal light goes out,
the battery is charged.
The charging time through a USB cable is usually 5 hours, and 2 hours through a power
adapter.
Use
• Before use, make sure the battery is fully charged.
• Insert the bit you want to use into the clamping chuck.
• To screw out, press and hold the upper part of the ON button. To screw in, press and hold
the lower part of the ON button.
• Letting up on the ON button stops the screwdriver.
The screwdriver has eight torque levels. The higher the level, the greater the torque. Turn the
screwdriver head to set the desired level. If you’re not sure which level to choose, start at a
lower level and increase it if necessary.
As soon as the screw is tight enough, the screwdriver stops so as not to damage the screw.
However, if you hear an unusual sound, immediately let up on the ON button.
Note:
This screwdriver is appropriate for C4 and C6.3 bits.
INSTRUCTIONS
Summary of Contents for APW-TKE170B
