AlzaPower APW-CCWF420, User Manual

Page: 7 / 36

7 ENGLISH
USE
Attachment to ventilation holes
1. Insert the retaining nut on the hinge of the ventilation holes holder and then release the
lock under the holder.
2. Insert the holder on the air vent grilles until the lock rests on the dashboard.
3. Place the charging base on the joint and secure with the retaining nut.
4. Insert the end of the USB-C cable into the USB-C charging connector. Insert the other end
into the USB-C connector of the charger and plug in the cigarette lighter (not included)
in your car.
Holder attachment to dashboard / windshield
1. Clean the area on the dashboard / windshield where you want to place the holder.
2. Place the holder in the desired place and secure it with the lock on the inside of the holder.
The lower part is equipped with a suction cup, which ensures maximum adhesion to the
surface.
3. Insert the retaining nut and coupling on the dashboard / windshield joint.
4. Place the charging base on the joint and secure with the retaining nut.
5. Adjust the distance and angle of the holder according to personal preferences.
6. Insert the end of the USB-C cable into the USB-C charging connector. Insert the other end
into the USB-C connector of the charger and plug in the cigarette lighter (not included)
in your car.
Charging
The APW-CCWF420 Wireless Charger is compatible with most smartphones that support the
wireless charging function.
1. Insert the phone into the charging base and the arms will automatically clamp on it to
ensure that the phone does not fall off the base. The charging process starts automatically.
2. If you need to remove the phone, press the phone release button on the back of the base.
The arms open and you can remove the phone comfortably.