6
Assembly
Turn the car upside down.
1.
Install the driving wheel on the rear axle to ensure that the connectors on the
driving wheel fit into the motor.
2.
Put the brake calliper into the groove of the rear axle.
3.
Put an
ф
8 gasket into the rear axle.
4.
Use a spanner to fix the driving wheel with M8 nut.
5.
Install the wheel cap.
6.
Put
ф
10 gasket into the front axle.
7.
Put the front wheel into the front axle.
8.
Put the brake calliper into the groove of the front axle.
9.
Put an
ф
8 gasket into the front axle.
10.
Use a spanner to fix the driving wheel with M8 nut.
11.
Install the wheel cap.
12.
Remove the M5×37 screw and M5 nut, then connect the steering wheel line with
the main body line.
13.
Install the steering wheel to the end of the steering rod. Align the hole on the
steering wheel and the hole on the steering rod.
14.
Insert M5×37 screw.
15.
Fix the windshield into the hole of the car body.
Driving wheel
Front wheel
Front axle
Rear axle
Summary of Contents for Mercedes-Benz SL500
Page 2: ...2 English 3 14 Čeština 15 26 Slovenčina 27 38 Magyar 39 51 Deutsch 52 65 ...
Page 5: ...5 Diagram Note Some parts shown are assembled on both sides of the vehicle ...
Page 17: ...17 Schéma Poznámka Některé zobrazené díly jsou smontovány na obou stranách vozidla ...
Page 29: ...29 Schéma Poznámka Niektoré zobrazené diely sú zmontované na oboch stranách vozidla ...
