14
Working Mode
Switch the Mode Button to “On”. After
turning on the camera, the screen
will display 15 seconds countdown. Then the LEDs and screen will go
out. The camera begins to operate independently and enter standby
mode.
If the wild animals enter the detection range of the motion sensors, the
camera will be activated and detect the motion trail.
If the wild animals continue to move to the detection zone of the
sensor, the camera will take photos or record video automatically.
When the wild animals leave the detection zone of the sensors, the
camera will be deactivated and turn back to standby mode.
Using the wall bracket
You can mount the camera permanently on a wall or tree using the
supplied wall bracket. Before mounting the wall bracket you should
ensure that all existing screws are tight. The best installation height
distance from the ground is about 1 meter.
Components
1. Tripod screw
2. Lock nut
3. Pivot bolts
4. Drill holes
5. Hexagonal screw
6. Wall plugs
7. Screws
