background image

 

Product Instructions 

1.

 

Touch the switch for the first time: touch the switch for 0.5 s., the white indicator 
light continues to light up for 1.5 s., enter the sensing state, then reach out to 
sense and enter the working state, and the foaming time is about 0.6 s. 

2.

 

Touch the switch for the second time: the white indicator light flashes twice, 
reach out to sense, and the foaming time is about 1 s. 

3.

 

Touch the switch for the third time: the red-light flashes twice and the product is 
turned off. 

4.

 

Low battery mode: The red-light flashes for 3 seconds and then move into 
working mode. 

5.

 

No battery mode: the red-light flashes for 3 seconds but will not move into 
working mode. 

6.

 

Warming mode: the alarm will go off if hands are placed near the sensor for a 
long time. Place hands away from the sensor and then back again to resume the 
machine. 

 

Precautions 

1.

 

It is recommended to use the original hand sanitizer with this product. 

2.

 

It is recommended to use the qualified 4 double A alkaline batteries. 

3.

 

Do not use non-foaming hand sanitizer to avoid machine failure 

4.

 

Do not immerse the product in water or wash it directly with water to avoid short 
circuit.  

5.

 

When installing or replacing hand sanitizer, do not tilt the bottle. If a small 
amount of liquid flows out, i tis normal, it can still be used normally after wiping. 

6.

 

Store the product in a cool place away from direct sunlight or near heat sources. 

7.

 

Do not dump this product to prevent the hand sanitizer from entering the 
damaged parts inside the machine. 

8.

 

If you need to clean it, it is recommended to gently wipe the surface of the 
machine with a wet towel when i tis turned off. 

9.

 

If the product is not used for a long time, please take out the dry battery to avoid 
the battery from getting wet and leaking. 

10.

 

Please do not place your hands near the sensor too rapidly for many times or 
stay there for a long time, as this will make the red-light flash and enter the 
warning mode. 

 

 

 

 

 

Summary of Contents for Baseus Minipeng










Reviews: