5.3 Assembly Steps – Motors and Props
Step 1.
Prepare 4pcs M3x8mm HexCap Screws with 4pcs
3mm Washers to install the motors to the Motor
Mounts.
Step 2.
Insert a M3x8mm Screw into a 3mm Washer then
insert to the motor mount slot as to mount the Motor
to it.
(Apply little amount of Thread Locker when
assembly metal to metal parts.)
Step 3.
Secure the motor to the motor mount with 4pcs
screws and washers.
Step 4.
Insert the Motor Wires into the slot of motor mount
and connect with motors.
16
