Step 65.
Repeat step 63-64 to hook the other
Tension Springs to the rest of the Spider
Arms and secure the other end of the
Tension Springs onto the M2x6 Hex Cap
Screws and M2 Nuts.
Step 66.
Refer to the instruction manual for the FPV
Mount to complete the FPV Mount. And
prepare 2x M2x18 Hex Cap Screws, 2x M2
Nuts, 1x Damper Rod(short), 1x Damper
Rod(long) and a small size servo(not
included).
(Just bypass this step to step 71
if you do not want to install the FPV Mount
now.)
Step 67.
Insert a M2x18 Hex Cap Screw into the
servo hole of the Central Frame and
followed by a Damper Rod(long). And insert
the servo wire into the servo hole on the
Central Frame.
Step 68.
Install the servo to the Damper Rod(long)
and secure it with a M2 Nut.
www.alwarerc.com
