ALVEO3D ALVEOPRO - M100, Instruction Manual

Page: 9 / 20

08
Extend the other one end of the hose by 10 cm.
Use the countersunk M4 screw 16 mm for panel thickness from 2 to 7 mm.
Use the countersunk M4 screw 20 mm for panel thickness from 8 to 12 mm.
STEP4 . CONNECT TO ENCLOSURE
Place the clamp ring on
the extended hose.
The tighten frame must be
inside the enclosure.
Tighten the clamp ring on
the enclosure connector.
Insert hexagonal M4 nuts
in the tighten frame and
tighten the screws to hold
the enclosure connector
on the panel.
1.
2.
3.