Alvarion BreezeACCESS SU-A-EZ, Product Manual

Page: 146 / 165

Chapter 5 - Command Line Interface DFS Commands
BreezeACCESS SU-A-EZ 129 Product Manual
5.14.2 set ClientSta dfsChannelCheckTime
This command sets the number of minutes the unit will check a frequency for
radar signals in order to validate it as either a Radar Free or Radar Detected.
Syntax
set ClientSta dfsChannelCheckTime < no. of minutes >
• no. of minutes - The number of minutes the unit will check the channel. (Range: 1-60)
Default Setting
60
Command Mode
Installer, Admin
Example
5.14.3 set ClientSta dfsChannelAvoidancePeriod
This command sets the number of minutes the channel will be unavailable for
usage after radar signals are detected on it or on an adjacent channel.
Syntax
set ClientSta dfsChannelAvoidancePeriod < no. of minutes >
• no. of minutes - The number of minutes to keep the frequency tagged as Radar Detected
or Adjacent to Radar. (Range: 1-60)
Default Setting
30
Command Mode
Installer, Admin
Example
5.14.4 set ClientSta
dfsClearRadarDetectedChannels
This command sets whether after a status update command, the unit tags all
frequencies as Radar Free or reverts them to their previous status.
Syntax
set ClientSta dfsClearRadarDetectedChannels < yes | no >
•
yes
- Sets all frequencies to Radar Free after the next status update
Installer# set ClientSta dfsChannelCheckTime 25
Installer#
Installer# set ClientSta dfsChannelAvoidancePeriod 12
Installer#