Alvarion BreezeACCESS EZ AU-EZ, System Manual

Page: 59 / 175

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS EZ AU-EZ 40 System Manual
4.2.2.4 Show Country Dependent Parameters
Each country has its radio regulation regarding transmissions in the applicable
bands that affect parameters such as available frequencies, bandwidth, transmit
power, etc. Some other parameters and options may also vary among countries.
For each country, one or more sets of parameters are pre-configured in the
factory. If more than one set is available, the set to be used can be selected. The
Show Country Dependent Parameters displays the available set(s) of these
parameters, and includes the following:

Country Code: The 3 digits country code according to ISO 3166 and the
country name. Some regulatory requirements apply to more than one country.
In these cases the Country Code includes a 4 digits proprietary group code
and the Country Group name (for example FCC).

Data Encryption Support: Indicates whether data encryption is supported for
the applicable country.

AES Encryption Support: Indicates whether encryption using AES is
supported for the applicable country. In AU-EZ AES is not supported.

Authentication Encryption Support: Indicates whether authentication
encryption is supported for the applicable country.
In the current release of AU-EZ, only a single Sub-Band is available. The following
Sub-Band information is provided:

Sub-Band ID (1) and Frequencies

Allowed Bandwidth: In current release, Allowed Bandwidth is 20 MHz.

Regulation Max Tx Power at Antenna Port: The maximum transmit power
allowed at the antenna port of the unit.

Regulation Max EIRP: The maximum allowed EIRP (Effective Isotropic
Radiated Power) in dBm, or No Limit.

Min Modulation Level: The lowest allowed modulation level.

Max Modulation Level: The highest allowed modulation level.

Burst Mode: Indicates whether Burst Mode operation is allowed.