Alva Nanoface User Manual Download Page 8 | Manualshive

Page: 8 / 25

Alva Nanoface User Manual Download Page 8

14

15

1. Driver installation

1. Connect the Nanoface to your computer with the included USB cable.
2. Open the Windows driver folder on the included CD and select 32 bit or 64 bit - depending on your Windows version. Double click the

file Setup.exe.

3. Choose a language for the installation process.
4. Select “Install the driver”. The installation starts and installs the

Nanoface ASIO driver for professional audio programs

, like Steinberg

Cubase or Magix Samplitude, and the

Windows WDM driver

for the system sounds and standard audio programs (Windows Media Player,

iTunes, Winamp).

5. After the successful installation a reboot of the system is necessary.

2. Windows audio setup

Set the Nanoface as

default audio device

for playback and recording.

Tip

. Windows 7 provides speaker sets for stereo and surround. The stereo setup assigns channels 1/2 (output RCA connectors on the breakout

cable) to the speakers. The 5.1 surround setup assigns the following channels to the speakers: Channel 1 (Front Left), Channel 2 (Front Right),
Channel 3 (Sub), Channel 4 (Center), Channel 5 (Rear Left), Channel 6 (Rear R).

Driver installation

Windows 32 bit and 64 bit

Getting started - driver installation

3

3

Getting started - driver installation

Driver installation dialog

After the successful installation the

Windows device manager shows the

Nanoface WDM Audio and MIDI devices.

Default playback device - Stereo speakers (Line outputs 1/2).

Default recording device (Line inputs 1/2).

Always check the ALVA
website for the latest drivers:
www.alva-audio.com

«
...
6
7
8
9
10
...
»

Summary of Contents for Nanoface


























Reviews:

No comments