PARTS DIAGRAM
1
Heated air outlet
2
Control panel
3
Supporting legs
4
Cold air inlet
5
Appliance body (front face)
INSTALLATION
COMPONENT
QTY
Heater
1
Supporting legs
2
Mounting screws for supporting legs
4
Operation manual
1
1. Open the carton and carefully remove the appliance.
2. Remove all foam and plastic seals from the edges of
the appliance.
3. Using the 2 supporting legs from the heater package,
turn the appliance over so that cold air inlet faces up.
4. Attach the supporting legs to the base of the heater on the
left and right sides - the mounting holes should align with
receiving holes on the heater body (Fig.1).
3
Always ensure that the
heater is unplugged
when not in use,
installing and cleaning.
1
2
3
4
5