SETTING UP YOUR BUTANE STOVE
1. Confirm that you have the right model for your type of gas
supply.
2. When unpacking, make sure that all of the parts of the
stove are included. Assemble the parts as shown in Fig. 7.
3. Perform the LEAK TEST.
4. Position properly see Fig.8
INSTALLING THE BUTANE CANISTER
Only use 220g Butane cartridge
which complies with EN 417.
1. Open the cartridge cover.
2. Make sure ignition knob is
in “O” position and cartridge
lever is in “RELEASE” position
(Fig.9). If the ignition knob is
not completely in “O” position,
the cartridge cannot be
engaged into “LOCK” position.
Fig.8
25cm
120cm
25cm
25cm
Wall
Wall
Wall
Wall
Fig.7
4
FOR YOUR SAFETY
IF YOU SMELL GAS
OR HISSING SOUND
•
Turn the ignition
knob on the stove
to ‘O’ , to stop the
gas flow and turn
the unit off.
•
Ventilate the
area.
•
Check for leaks
(see LEAK TEST)
•
If odour or sound
persists, release
the cartridge
lock lever to the
upward posi-
tion and remove
and isolate the
gas cartridge
and contact
your dealer or
local gas supplier
immediately.
Fig.9
UNLOCK
LOCK
MAX
MIN
ON
OFF