15
System Function
System Setup
From the main menu, press the “◄” or “►” buttons to select the and press “►|| / OK”
button to confirm. Use the “▲” or “▼” button to cursor to “System Setup” menu.
Press the
“►|| / OK”
button again to access the “System Setup” menu.
You will see the following options: Language, GrayScale, Brightness, Contrast, Power Off,
Power On, Power Frequency, Start Up Mode, Firmware Version, and Reset Default Settings.
Use the “▲” or “▼” button to cursor through the menu. To make any changes to the setup
option highlighted, press the “◄” or “►” button to select the desired option.
Once your selection has been made, press the “▲” or “▼” button to move on to the next
menu option.
To make changes to the Power Off/Power On option, once it is highlighted, press “►||” button
to bring up the submenu to change the time or press the “▲” and “▼” to switch it ON / OFF.
Use the “◄” or “►” to highlight either hour or minutes and use “▲” and “▼” to set the desired
time. Once the desired time is shown, press “►|| / OK” button to confirm or
“Return”
to cancel.
Press the
“Return”
button to return to the Setup menu. Press the
“Return”
button again to
return to the Main menu.
