Aluprof DM45RM, Programing Manual

Page: 7 / 33

- 7 -
DC 230
Remote controllers
description
LEGEND :
UP
- activation of this button will move roller shutter up
DOWN
- activation of this button will move roller shutter down
P2
- activation of this button will bring the tubular motor
in to programming
K+
- activation of this button will switch to the next channel
K-
- activation of this button will switch to the previous channel.
K1
–buttons of channel one
K2
–buttons of channel two
MODE
– button which activates the settings of clock and date coder
DC 230 DC 229
K2
K1
UP
STOP
DOWN
DC 316 DC 315
K2
K1
UP
STOP
DOWN
Activation of the “P2” button
in remote controller DC315 and DC316
is performed by a combination
of both keys “STOP” and “UP”.
DC 287
DC 288
DC 289
UP
K+
STOP
DOWN
K-
P2
DC 313
DC 306
P2
DC 305
DC 920
UP
K+
STOP
DOWN
K-
DC 250 DC 251 P2
UP
K+
STOP
DOWN
K-
DC 1702 DC 1700
UP
STOP
DOWN
K-
K+
P2
P2
P2
DC 1770
K2 K1
UP
STOP
DOWN
DC 1771
DC 115A
UP DOWN
STOP
KEYS
LOCK
Activation of the “P2” button
in remote controller DC115A and DC61
is performed by a combination
of both keys “STOP” and “UP”.
DC 317 DC 448
MODE P2 OK
UP
DOWN
STOP
DC 559 DC 661
To program the clock and the date coder,
please hold “MODE” button for 4
seconds until the numbers on the
display will flash. Change the numbers
using the “UP” & “DOWN” button and
press “MODE” button, if all the settings
are set up please press “OK” button.
MODE P2 OK
UP
DOWN
STOP
UP
STOP
DOWN
KEYS
LOCK
DC 61