2
PROGRAMMING MANUAL OF THE DC 920 TRANSMITTER
We reserve the right to any technical change.
Valid on 2022.04.04
4. ACTIVE CHANNEL SELECTION
Switch to automatic or random
mode.
Select the chosen channel.
Press “P2” button, the digit
of the disabled channel will flash.
Again press of the “P2” button
will switch off chosen
channel.
3. OPERATING MODE CHANGE
Press “MODE” button. Mode
will channge.
By reapitting procedure
will change mode between:
“Manual”,
“Automatic”,
“Random”.
Manual mode - without time control function,
Automatic mode - with time control function,
Random mode - with time control function with a random selected time within ± 15 minutes to the set automatic time.
5. SETTING OF THE CURRENT TIME
Switch to manual mode
Press and hold “TIME”
By pressing the “UP” or “DOWN”
buttons, settings of the
Press “TIME” buttons.
Minutes digits will flash.
button for 5 seconds. Hour digits
will flash.
hour can by change.
Press and hold “TIME” button for 5
seconds till flashing of the icons on
By pressing the ”UP” or “DOWN”
buttons, settings of the
minutes can by change.
LCD will stop and currently set time
will be displayed.
