6
We reserve the right to any technical change.
Valid on 2022.05.23
PROGRAMMING MANUAL FOR UNDERPLASTER RADIO CONTROLLER AL-RSP 01
6.3. DELETING THE TRANSMITTER
Press the “P2” button
which will be confirmed by
The transmitter has been deleted.
a short voltage supply to the
Press the “P2” button
which will be confirmed by
a short voltage supply to the
Press “STOP” button ,
which will be confirmed by a
short voltage supply to the
W1 or W2 output.
W1 or W2 output.
W1 or W2 output.
7. RETURN TO FACTORY SETTINGS
While the power supply is ON
press 7x the PROG programming
The LED will turn green -
red - green.
button,
which will be confirmed by
The LED will turn red, which will be
confirmed by a short voltage supply
to the W1 or W2 output (the
motor will move up - down)
All transmitters have
been removed.
Production Plant in Opole;
ul. Gosławicka 3, 45-446 Opole, Poland,
tel. +48 77 40 00 000, fax +48 77 40 00 006
e–mail: [email protected]
the LED.
Manufacturer:
Headquarters; Production plant in Bielsko-Biała:
ul. Warszawska 153, 43-300 Bielsko-Biała, Poland,
tel. +48 33 81 95 300, fax +48 33 82 20 512
