Alula RE629 Glassbreak Connect+ Encrypted, Quick Start Manual

Page: 2 / 2

IC NOTICE
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux cnr d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) L’appareil ne doit pas produire de brouillage, et
(2) L’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
IC: 8310A-RE629
FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may be received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by Alula could void
the user’s authority to operate this equipment.
FCC ID: U5X-RE629
TRADEMARKS
Alula and are trademarks owned by Alula Holdings, LLC.
3M and VHB are trademarks owned by 3M Company.
Panasonic is a registered trademark owned by Panasonic
Corporation.
Specifications
Physical
Housing Dimensions
Weight with Battery
Mounting Fastener 4.1 x 2.3 x 1.0 inches (10.6 x 6.0 x 2.6 centimeters)
2.75 ounces (78 grams)
#6 screws, anchors, VHB tape (all provided)
Environmental
Operating Temperature
Maximum Humidity 32°F to 120°F (0°C to 49°C)
85% non-condensing relative humidity
Sensor Specifications
Frequency
Replacement Battery
Nominal Battery Life
Battery Voltage
Current Draw
Transmitted Indications 433.92 MHz
One Panasonic
® CR123A
3.5 years
3.0 VDC (Nominal), 2.2 VDC (Low)
30 mA (Maximum), 50 uA (Quiescent)
Low Battery, Tamper, Supervision, Alarm
Certification
RE629 FCC, IC
Specifications subject to change without notice.
47-00003 • REV A • 2020-04-01
Tech Support Line • (888) 88-ALULA • (888) 882-5852
alula.net
Pro Tips
3M™ VHB Tape
works great if the surface is properly prepared and firm pressure is applied for
over 10 seconds.
Surface Preparation
• Clean the surface
• Ensure the mounting surface temperature is above 50 °F
When sensor detects
breaking glass, the LED will turn on for 5 seconds.