11
• Press the Test/Silence button on the Smoke
Alarm causing the Alarm (this can be identified
as the Alarm with the red light flashing
rapidly) – this will silence the Smoke Alarm
for 10 minutes (and also silence all other
interconnected Alarms in the system).
The Alarm fails to sound when the Test
button is pressed
• Check the age of the unit - see the “replace
by” label on side of unit.
• If necessary replace the battery or batteries
with Panasonic CR123A.
9. System Compatibility and
Wireless Verification
Smoke alarm model RE314 has only been
evaluated at ETL with DSC Impassa Model#:
SCW9057 and Power Series Control Panel
Model#: PC1832
Test the system after finishing installation,
enrollment, and configuration. Refer the
panel’s manual for instructions on testing the
system.
