Ceiling
Floor
The Indoor Motion Sensor
alarms when motion is sensed
or when the external contact is opened. It is battery
powered and requires no installation tools. A Pyroflex
™
sensor with HighBar
™
signal processing allows for industry-
leading pet immunity and catch performance.
Features
• Industry-leading pet immunity and catch performance
• Supports both motion zone and an external contact zone
• Mountable on walls or in corners
• 5 year warranty
Enroll
by placing the panel into learn mode and then tripping
the tamper switch. Enroll the external contact zone by
inserting the battery with the external contact closed.
Install
using the included 3M™ VHB™ tape to adhere the
motion sensor on a wall or in a corner. The tape should
be applied to the
back
when wall mounting or to the
back bevels
when corner mounting. Alternatively, screw
mounting can be done by punching out the screw mounting
holes.
Installation Tips
•
Mount 7.5 to 9.5 feet from the floor for an
optimal balance between catch performance
and pet immunity.
• Remove the cover and circuit board before
trying to punch out the screw mounting holes.
• Ensure the bug foam stays intact and
snug around the IR sensing element when
re-installing the circuit board.
External Contact
• Use a
normally-closed
contact because the
motion sensor will transmit an alarm when it
sees the external contact
open
.
• Do not use end-of-line resistors.
Suggested Group Types
• Use Interior Follower for the motion zone
• Use Perimeter for the external contact zone
Mounting Screw Holes
Verify proper enrollment and operation using your control panel’s installation manual
.
IN
STALL
G
U I D E
I
Resolution Compatibles
RE110P Indoor Motion Sensor
-Pet Immune Interlogix
®
Compatible