manualshive.com logo in svg

Alu Rehab Netti III HD, User Manual, Page: 13 / 40

Share
Download
Alu Rehab Netti III HD User Manual Download Page 13

13

 

   Language: English  Model: Netti III HD  Version: February 2013

Front forks

Wide w/ axle

Sliding seat

The seat can be pulled 

out and pushed in 

while the user sits in

the seat.  This eases 

transfer and 

positioning of the user

Comfort plate

The plate has a hole in 

the rear, which in co-

operation with the seat 

cushion increases pelvic  

stabilization.

Calf pad hinged

The user doesn’t have to

lift the legs when 

mounting or dis-

mounting the foot 

supports.

Foot board with lock

The foot supports can 

be swung to the side 

like standard foot 

supports.

Side support Correction

Meant for correction of  bad 

postures in the upper trunk.

For optimal function use 

together with flip backrest.

Pad for side support 

Correction

Side support Stable

Meant for users with de-

creased stability of the 

upper trunk. For otimal 

function use together 

with Stable cushion. 

Pad for side support 

Stable

Long back rest hinge

Covers seat depth:

54,5, 57 and 59 cm.

Must be used with 

extra long locking 

head.

El. components

For tilt, back rest and 

foot supports 

seperate or complete.

Frame extender

Increases distance 

between main wheels 

and front castors.

Reduces tipping risk.

Upholstery for

calf support bracket

Reduces pressure.

Tool set

Summary of Contents for Netti III HD









































Reviews:

No comments