Altwork TruVue Assembly And Use Download Page 2

TruVue -

 

VCS

Video Conferencing Station

Product Details:

Lighting solution and webcam mounting system designed to attach 
to most monitors with an integrated VESA mount including monitors 
on Altwork Stations Includes:
Mounting frame and hardware:

Attaches to monitors with standard 75x75 and 100x100 VESA 
screw locations

(4) M4 mounting screws for mounting to your Altwork Station of 
other VESA mount

Includes P2 screwdriver for assembly (No other tools required)

Lighting system with 2 LED panels and manual reset/control switch

Light Panels

Source type light: LED

LED type: “2835”

LED bulbs: 240 pcs (per panel)

LED panel size 6-1/4” x 9”

Dimmable from 0-100% 

Color temperature: 2700K-5700K

Impute power: AC100-240 VAC 50/60 Hz

Out power: 42W (per panel)

Lighting remote:

Turns lights on/off (Separately or together)

Adjusts brightness warm to cold (Separately or together)

Adjusts light intensity (Separately or together)

(2) AAA batteries (US only)

Webcam Mount:

Designed to work for all standard webcams

Webcam mounts with standard 1/4-20 screw or adhesive tape 
(included)

6” Webcam vertical travel from top of screen

Retracts out of view above monitor

Flips down for desk view

WARNING!

The power cord plug should be firmly inserted in the socket, and the power plug 
should be pulled out after use to prevent electric shock and fire. The lights can not be 
controlled fully when the battery power of the remote control in insufficient. Please 
replace remote battery in time.

Do not pull out the plug by pulling the power cord. Be sure to hold the plug firmly and 
pull out of the socket.

Do not pinch or kink the power cord during adjustment of the lights.

Do not use when the power cord is damaged, or the plug is worn.

Don’t spray or wash the product with water, and do not place it in a wet and easily 
splashed place, so as to avoid affecting the electrical insulation performance of the 
product.

Packing List

1.

Frame with Lights

2.

VESA Mount Brackets

3.

Slides

4.

Camera Mount Assembly

5.

Hardware Kit

6.

Remote

5

4

2

1

6

3

Summary of Contents for TruVue



























Reviews: