Altusen KL9108 Page 112 User Manual Download

Page: 112 / 158

KL9108 / KL9116 User Manual

100

Port Operation

Java Client port operation is the same as for the Windows Client. See

Port

Operation

, page 83, for details.

Panel Array Mode

This is very similar to the Windows Client Panel Array Mode (see page 85 for
details), except for some differences in the toolbar. The Java Client Panel Array
Mode Toolbar is described in the table below:

Keyboard Hotkey Operation

Keyboard hotkey operation is the same as for the Windows Client.
See

Keyboard Hotkey Operation

, page 88, for details.

Pauses panel scanning, leaving the focus on the panel that had it when you
clicked. After you click

Pause

, he button changes to an arrowhead and its

caption changes to

Resume

. To resume scanning, click the Resume button.

Move back four panels.

Move to the previous panel.

Move to the next panel.

Move ahead four panels.

Increase the number of panels in the array.

Decrease the number of panels in the array.

Toggle 4/3 aspect ratio.

Exit Panel Array mode.

Summary of Contents for KL9108































































































































































Search results

Summary of Contents for KL9108

Reviews:

Related manuals for KL9108

Brands by name

Popular brands

Altusen KL9108, User Manual

Search results

Summary of Contents for KL9108

Reviews:

Related manuals for KL9108

Brands by name

Popular brands