Trove1SH1R Installation Guide
- 7 -
TSH1R:
Configuration of Software House iSTAR Pro Boards
1. Align the Software House boards on the backplane to match the boards’ mounting holes with corresponding pems.
2. Fasten provided spacers to pems that match the hole pattern for Software House iSTAR ACM SE/PRO ACM
and/or I8, R8, I8-CSI boards.
3. Mount Software House boards to spacers utilizing 5/16” pan head screws (provided)
(Fig. 7, 7a, pg. 7)
.
Note:
Software House iSTAR ACM SE/PRO ACM boards have one (1) USB port each.
Please orient boards in the appropriate position according to the
Fig. 7
below.
4. Mount backplane to enclosure with hardware.
Position Chart for the Following Models:
Software House iSTAR Ultra Controller
Pem Mounting
iSTAR ACM SE/ PRO ACM
A
I8, R8 or I8-CSI Module
B
Fig. 7
B
B
B
B
B
B
USB PORT
USB PORT
A
A
Pem
Spacer
Backplane
Pan Head Screw
Software House
Board
Fig. 7a
