- 6 -
Trove1HWR Installation Guide
Installation Instructions for
Honeywell PRO32E1PS or PW6K2E2PS to THW1R:
1. Install four (4) mounting screws approximately halfway into mounting holes in the power supply’s frame.
2. Position the power supply over four (4) keyholes (B) on THW1R.
3. Slide the power supply forward until secure. Tighten the mounting screws.
Installation Instructions for
Honeywell Access Controllers to THW1R:
1. Fasten spacers (provided) into pem configuration (A) of backplane
(Fig. 6, pg. 6)
.
2. Mount boards to spacers utilizing 5/16” pan head screws (provided)
(Fig. 6a, pg. 6)
.
3. Mount backplane to enclosure with hardware.
Honeywell ProWatch/WinPak Power Supply or Access Controller
Position Chart for the Following Models:
Honeywell Board
Pem Mounting
3200 Series or WIN-PAK Series
A
PRO32E1PS or PW6K2E2PS
B
Fig. 6
A
A
A
A
B
Pem
Spacer
Backplane
Pan Head Screw
Honeywell
Board
Fig. 6a
