Trove1PD1 / TPD1
- 3 -
TPD1: Configuration of Altronix Power Supply, Sub-Assemblies and PDK Modules
1. Fasten spacers (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers (Fig. 2, pg. 3).
Fasten metal spacers in the correct locations to provide proper grounding, see below (Fig. 2, pg. 3).
2. Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 2a, pg. 3).
3. Fasten spacers (provided) to pems that match the hole pattern for PDK 8DEE modules.
Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 2, 2a, pg. 3).
Note: PDK 8DEE modules have one (1) RJ45 jack each.
Please make sure that they are mounted correctly, as shown in Fig. 2 below.
4. Fasten TPD1 backplane to Trove1 enclosure utilizing pan head screws (provided).
Fig. 2 - Trove1PD1/TPD1 Configurations
Metal
Spacer
Placement
Metal
Spacer
Placement
Altronix
Power
Supply
Altronix
Power
Supply
Altronix
Sub-
Assemblies
RJ45 Jack
RJ45 Jack
RJ45 Jack
RJ45 Jack
RJ45 Jack
PDK
8DEE
PDK
8DEE
PDK
8DEE
PDK
8DEE
PDK
8DEE
Pem
Spacer
Altronix
Power Supply or
Sub-Assembly
Backplane
Pan Head
Screw
Fig. 2a
