background image

 

- 4 - 

SMP7CTX220 Series

Terminal Identification:

Power Supply Board:

Terminal Legend

Function/Description

L, G, N

Connect 220VAC to these terminals: L to Hot, N to Neutral.

– DC +

12VDC / 24VDC @ 6A continuous output.

*AC FAIL 
NC, C, NO

Used to notify loss of AC power, e.g. connect to audible device or alarm panel. 
Relay normally energized when AC power is present. 
Contact rating 1A @ 120VAC / 28VDC.

*Low Battery 
NC, C, NO

Used to indicate low battery condition, e.g. connect to alarm panel. Relay normally
energized when DC power is present. Contact rating 1A @ 120VAC / 28VDC.
Low battery threshold:
12VDC output threshold set @ approximately 10.5VDC, 
24VDC output threshold set @ approximately 21VDC.

– BAT +

Stand-by battery connections. Maximum charge rate 0.7A.

*Note: Supervised models only

PD4/PD4CB/PD8/PD8CB/PD16W/PD16WCB - Power Distribution Module:

Terminal Legend

Function/Description

PD4/PD4CB

PD8/PD8CB

PD16W/PD16WCB

1P to 4P

1P to 8P

1P to16P

Positive DC power outputs.

1N to 4N

1N to 8N

1N to 16N

Negative DC power outputs.

Caution: Equipment to be installed / serviced by authorized / trained personnel only. 
Shut branch circuit power before installing / servicing equipment.

WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. 
This installation should be made by qualified service personnel and should conform to the National 
Electrical Code and all local codes.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user 
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may 
be of sufficient magnitude to constitute an electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in the literature accompanying the 
appliance.

CAUTION: To reduce the risk of electric shock do not open 
enclosure. There are no user serviceable parts inside. 
Refer servicing to qualified service personnel.

Summary of Contents for SMP7CTX220 Series









Reviews: