- 8 -
NetWaySP4PX Installation Guide
Mounting Options:
Rack Mount Installation
1. Remove and discard factory installed screws from both sides of rack chassis
(Fig. 4a)
.
2. Install mounting brackets (A) on the left and right side of rack chassis
using the four (4) flat head screws (B)
(included)
(Fig. 4b)
.
3. Place unit into desired EIA 19” rack position and secure with mounting screws
(not included) (Fig. 4c).
A
B
Fig. 4a
Fig. 4b
Fig. 4c
Fig. 4
Top
Top
Top
Front
Left
Front
Left
Front Left
Remove
Wall Mount Installation
1. Install mounting brackets (A) on the left and right side of rack chassis
using
four (4) flat head screws (B) (included)
(Fig. 5a)
.
2. Place unit at desired location and secure with #6 size screws or larger
(not included) (Fig. 5b).
Caution:
It is necessary to make sure mounting screws are securely fastened
to a beam when installing the unit vertically.
B
A
Fig. 5
Fig. 5a
Fig. 5b
Dotted lines indicate studs behind sheetrock.
Shelf Installation
1. Position and affix rubber pads (C) (included) at each corner on the bottom of the unit
(Fig. 6)
.
2. Place unit in desired location.
Fig. 6
C
Left Side
Rubber Pad
B
A
C
Mounting Hardware
(Included)
:
Two (2) mounting brackets
Six (6) flat head screws
for mounting brackets.
Four (4) rubber pads.
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty
IINetWaySP4PX H26U
MEMBER
