www.altronix.com
- 3 -
NetWay8E
6. When the use of stand-by batteries is required, they must be sealed lead acid or gel type.
Connect four (4) 12VDC batteries in series to terminals marked [+BAT–] (Fig. 2e, pg. 3), carefully observing polarity.
Note: When batteries are not used, loss of AC will result in a loss of output voltage.
Fig. 2
2a 1Gb uplink to NVR.
2b OUT 1-8: Structured cable to powered cameras/devices.
2c Input Power LED.
2d IEC 320 Connector: 115/230VAC (grounded line cord included).
2e Built-in battery charger: Charges stand-by batteries for
applications requiring back-up.
(Optional rack mount battery enclosure available - RE2)
Installing a NetWayXT/NetWayXTX repeater module:
NetWayXT will work only with PoE devices.
NetWayXTX will work with PoE/PoE+ devices.
1. Mount NetWayXT/NetWayXTX in desired location utilizing the mounting hole (Fig. 3, pg. 3).
Use a proper fastener and/or wall anchor when securing NetWayXT/NetWayXTX to the wall.
2. Connect structured cable from port marked [OUT] on NetWay to port marked [IN] on the
NetWayXT/NetWayXTX
(Fig. 3, pg. 3).
3. Connect structured cable from port marked [OUT] on NetWayXT/NetWayXTX to the
PoE/PoE+ camera/edge device or next NetWayXT/NetWayXTX repeater (Fig. 3, pg. 3).
4. Port status LEDs will illuminate on NetWayXT/NetWayXTX indicating the port is operational
(refer to LED Definitions, pg. 3).
5. Power LED will illuminate indicating 12VDC output.
Port LED Definitions for NetWayXT and NetWayXTX Repeaters:
Status
NetWayXT
NetWayXTX
Green LED
Yellow LED
PoE/PoE+ Output LED
PoE/PoE+ Input LED
Yellow LED
OFF
Indicates it is connected as 10Base-T or no link.
Indicates no link.
No PoE/PoE+ Output
No PoE/PoE+ Input
Indicates no link.
ON
Indicates it is connected as 100Base-TX.
Indicates a link.
Normal PoE/PoE+ Output
PoE/PoE+ Input
Indicates a link.
Blinking
-------
Indicates activity.
-------
-------
Indicates activity.
AC POWER
+ BAT –
NetWay8E - Rear Panel
1Gb
NetWay8E - Front Panel
2a
2b
2c
2d
2e
NetwayXT
Repeater
www.altronix.com
IN
OUT
Power
Power
LED
Structured
Cable from
NetWayG
Structured
Cable from
NetWayG
Structured Cable
to IP Camera/
Edge Device
or next
NetWayXT
PoE/PoE+
Output
LED
Structured
Cable to
PoE/PoE+
Camera/Device or
next NetWayXTX
Port Status
LEDs
PoE/PoE+
Input
LED
NetWayXT
NetWayXTX
Fig. 3 - NetWayXT/NetWayXTX
