NetWay8MV / NetWay16MV
- 3 -
Overview:
Altronix NetWay8MV/NetWay16MV Managed Midspans provide power and pass data for PoE compliant cam-
eras/edge devices . Cameras/edge devices may be located up to 100m from the NetWayMV unit . A NetWayXT/
NetWayXTX repeater module can be utilized to extend the distance an additional 100m for a total range of up to
200m . A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement .
NetWay Managed Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing
NetWay1512 or NetWay3012 adapters .
NetWayMV Specifications:
Common Specifications:
NetWay8MV:
• Eight (8) ports of cameras/edge devices over ethernet
(CAT5) cable up to a distance of 100m per port .
• 220VAC 60Hz, 1 .5A (NetWay8MV) .
NetWay16MV:
• Sixteen (16) ports of cameras/edge devices over
ethernet (CAT5) cable up to a distance of 100m
per port .
• 220VAC 60Hz, 2 .5A (NetWay16MV) .
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the
authorities having jurisdiction . NetWayMV is not intended to be connected to outside plant leads . These products
are for indoor use only and must be installed within the protected premises .
1 . Attach mounting brackets to NetWayMV unit for rack or wall mount installation (Figs. 8 or 9, pg. 12) .
Affix rubber pads to NetWayMV for shelf installation (Fig. 10, pg. 12) .
2 . Secure the unit in a rack or place unit on a shelf as desired .
Note: The following factors should be taken into consideration when installing these rack mount units:
a . The unit is to be installed in a space where the maximum ambient temperature does not exceed 104ºF (40ºC) .
b . Take care to ensure there is sufficient air flow around the unit and that obstructions do not impede it .
c . When mounting units in rack, take care to avoid uneven loading which can cause a hazardous condition .
3 . Set illuminated master power disconnect circuit breaker to the (OFF) position (Fig. 1g, pg. 4) .
4 . Plug the grounded AC line cord (included) into the IEC 320 connector of the NetWayMV unit (Fig. 1h, pg. 4) .
Plug unit into a reliable earth grounded socket . When using multiple units, the sum of the individual name
plate ratings should not exceed the supply circuit rating .
Do not connect to a receptacle controlled by a switch.
5 . Connect structured cables from port marked [IN] on NetWayMV to the corresponding inputs of an ethernet
switch or video server (Fig. 1b, pg. 4, Fig. 5, pg. 6) .
Note: All cabling and wire must be UL Listed and/or Recognized wire suitable for their application .
6 . Connect structured cables from port marked [OUT] on NetWayMV to PoE compliant camera/edge devices
(Fig. 1a, pg. 4, Fig. 5, pg. 6) .
7 . Upon completion of wiring set illuminated master power disconnect circuit breaker to the RESET (ON)
position
(Fig. 1g, pg. 4) .
Agency Listings:
•
CE
European Conformity .
Power:
• Unit supplies PoE output voltage (55V), and up to
30W max . full power per port .
Total power:
NetWay8MV - 150W,
NetWay16MV - 300W .
• IEEE 802 .3af and IEEE 802 .3at compliant
(PoE Plus) .
• All output circuits are power-limited .
• Short circuit protection .
Functions:
• Programmble PoE shutdown for each port .
Utilized to reset cameras/edge devices
(see Technical Specifications pg. 5).
• PoE manual shutdown (See Technical
Specifications, pg. 5) .
• Auto detection and protection of legacy
non-PoE cameras/edge devices .
Features:
• LAN or laptop connection enables programming of
PoE shutdown and port monitoring .
• User interface (Fig. 6, pg. 8) .
• Illuminated master power disconnect circuit
breaker with manual reset (switch) .
• Individual port status LEDs .
• IEC 320 - 3-wire grounded line cord (detachable) .
• Unit can be rack or shelf mounted .
• 1U rack mount chassis for use in standard
EIA 19” rack .
Accessories:
NetWay1512:
• 15W adapter for non-PoE compliant IP cameras .
NetWay3012:
• 25W adapter for non-PoE compliant IP
fixed or PTZ cameras .
NetWayXT:
• PoE repeater module extends range 100m
NetWayXTX:
• PoE+ repeater module extends range 100m .
