background image

 

HubWay Passiive Unit 

- 7 -

(ON) 

16 

AC POWER 

15 

14 

13 

12 

11 

10 

CH 1-4 

CH 5-8 

28VAC 

OFF 

24VAC 

+ DATA --

1-8

+ DATA --

9-16

10 

11 

12 

CH 9-12 

28VAC 

OFF 

24VAC 

13 

14 

15 

16 

CH 13-16 

1.625"

41.3mm

8.5"

215.9mm

17.625"

447.7mm

0.75"

19.05mm

19.125"

485.8mm

TOP & BOTTOM

REAR

FRONT

Fig. 5
Illuminated master power disconnect circuit breaker:
  •  OFF position Circuit breaker tripped – Switch not illuminated.
  •  RESET (ON) position – Switch illuminated.

The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the
presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient
magnitude to constitute an electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: To reduce the risk of electric shock do not open enclosure. There
are no user serviceable parts inside. Refer servicing to qualified service personnel.

1U EIA 19” Rack Mount Chassis Dimensions 

(H x W x D approximate)

:

1.625” x 19.125” x 8.5” (41.3mm x 485.8mm x 215.9mm)

Summary of Contents for HubWay162Di









Reviews: