Programming Instructions:
A. Setting Clock/Calendar:
Upon initial power up
RLY OFF
SU 01:01
Depress
SET
ENTER to
SET TIME
Depress
ENTER
01/01/01
SU/01:01
Enter the current date, day of week and time (military) by depressing
UP
and
DWN
to make the selection then
depress
ENTER
to accept.
Next select either DS (daylight savings mode) or ST (standard time mode) by depressing set until
ENTER to
SET BK
Depress
ENTER
to scroll until flashing cursor appears under DS (daylight savings mode) in display. To change
mode depress
UP
or
DWN
once ST (standard time mode) will appear in display. Depress
ENTER
to accept
correct selection.
Note:
The flashing cursor denotes location of data entry selection to be made. If an entry was made in error or
requires changing, depress
SET
to backspace, make the correct selection and depress
ENTER
to accept
data and advance the cursor.
To change or program clock/calendar simply repeat the steps above.
B. Setting Events:
Depress
SET
until
ENTER to
SET EVENT
Depress
ENTER
#01 OFF
SU 00:00
Depress
ENTER
until the flashing cursor appears under OFF in display. Now select type of event required, by
scrolling using the
UP
and
DWN
push buttons until either:
ON - Relay ON (latching mode).
OFF - Relay OFF (latching mode).
PL - Relay Pulse ( momentary).
appears in display and depressing
ENTER
will make selection.
When selecting the pulse mode PL01 will appear in the display. It is now necessary to assign the length of time
(duration of relay activation). The pulse can range in length from 1 second minimum to 15 seconds maximum
and is selected by using
UP
or
DWN
push buttons, then depressing
ENTER
to accept.
Note:
If pulse duration is not selected relay output defaults to 1 second.
Next select the day of the week and time (military) by scrolling using
UP
and
DWN
push buttons and depress
ENTER
to accept.
You may continue to program events by repeating the previous steps or exit programming by depressing
SET
.
Note:
When programming additional events it is necessary to select the next consecutive event number following
the last event program to continue.
Note:
When it is required to have the same event repeated on two (2) or more consecutive days of the week
(Block Programming), enter the first day followed by the last day by depressing SUN through SAT.
Example:
1) Monday through Thursday depress MON followed by THURS.
2) Wednesday through Sunday depress WED followed SUN.
- 4 -
will appear in display.
will appear in display.
will appear in display.
appears in display.
appears in display.
will appear in display.
>
