Altronix AL1012ULX Series, Installation Manual

Page: 5 / 8

AL1012ULX Series - 5 -
Terminal Identification:
AL1012ULXB - Power Supply Board
Terminal Legend Function/Description
L, N
Connect 115VAC to these terminals: L to Hot, N to Neutral. Do not use the [G] terminal.
– DC + 12VDC @ 10A continuous non power-limited output.
AC FAIL
NC, C, NO
Indicates loss of AC power, e.g. connect to annuciator/alarm panel. Relay normally ener-
gized when AC power is present. Contact rating 1A @ 30VDC. AC Fail condition will
report approximately one (1) to one minute after loss of AC. To delay report for 6 hours
cut jumper J1 on the Power Supply Board (AC trouble output delay option). If this mode is
selected, the Power Supply Board must be reset by removing all power to it for 30 seconds.
BAT FAIL
NO, C, NC
Indicates low battery condition, e.g. connect to alarm panel. Relay normally energized
when DC power is present. Contact rating 1A @ 30VDC. Low battery conditions will
report approximately 10.5VDC. Battery presence detection will report approximately 1
minute after battery remains undetected (missing or removed).
+ BAT – Stand-by battery connections. Maximum charge rate 0.7A.
PD4/PD4CB/PD8/PD8CB - Power Distribution Module
Terminal Legend
Function/Description
PD4/PD4CB PD8/PD8CB
1P to 4P 1P to 8P Positive DC power outputs.
1N to 4N 1N to 8N Negative DC power outputs.
Power Distribution Module(s):
Fig. 2a - PD4UL Power Distribution Board Fig. 2b - PD4ULCB - Power Distribution Board
Non Power-Limited Outputs Class 2 Power-Limited Outputs
Fig. 3a - PD8UL Power Distribution Board Fig. 3b - PD8ULCB - Power Distribution Board
Non Power-Limited Outputs Class 2 Power-Limited Outputs
LED
F1 F2 F3 F4
1P 1N 2P 2N
3P 3N 4P 4N
DC Output to devices
1P-4P Power Outputs,
1N-4N Common Outputs
( )
From Power Supply
Board
(Factory Installed)
Replace fuses with the same type and rating 3.5A, 250V.
INPUT
LED
F1 F2 F3 F4
POWER OUTPUTS
1P 1N 2P 2N 3P 3N 4P 4N
DC Output to devices
1P-4P Power Outputs,
1N-4N Common Outputs
From Power Supply
Board
(Factory Installed)
( )
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
INPUT
R1
LED
From Power Supply
Board
(Factory Installed)
Replace fuses with the same type and rating 3.5A, 250V.
DC Output to devices
1P-8P Power Outputs,
1N-8N Common Outputs
( )
N
C O M M O N P O W E R O U T P U T S
P
F U S E D P O W E R O U T P U T S
1 2 3 4 5 6 7 8
D1
INPUT
R1
LED
From Power Supply
Board
(Factory Installed)
DC Output to devices
1P-8P Power Outputs,
1N-8N Common Outputs
( )