REDBACK® DAB+/FM Tuner & CD/MP3 Disc Player
Page 3
Operation
POWER ON/OFF:
The unit has a main power switch. When the main power is switched on, both LCD displays will light up.
*Except where indicated, all commands here described can be performed or activated using either the front panel buttons or the
remote control.
AUDIO PLAYER SECTION:
CD OPERATION - COMPACT DISCS
The CD player accepts both 12CM and 8CM compact discs. Insert a disc into the slot with the data side facing down, and press
the play button to begin playback. Use the CD/TUNER button on the remote control to switch to CD/USB/Card Mode. The CD on
indicator LED will light up and the display panel will display CD and the Track number and playing time.
Warning: When inserting a disk into the CD player or taking a disc out, it is necessary to let the CD player insert the disk and
return automatically. Do not force the disc in or out of the disc slot as this may cause serious damage to the unit.
• If the unit does not accept a CD, check that Card or USB modes are not selected. Press the FUNCT button until CD displays.
Press PLAY in order for the unit to load and recognise the CD.
• If the unit does not eject a CD, check that Card or USB modes are not selected. Press FUNCT button until CD displays. Press
PLAY in order for the unit to load and recognise the CD, then STOP/EJECT. The CD will now eject.
FUNCTIONS:
Note: Some functions are not described in detail here because they are standard functions whose operations are simple
and/or self-explanatory. Except where indicated, these functions are accessible from buttons on both the front panel and the
remote control.
A-B:
This function is only available from the remote control. It allows a selected section of music source to be continually
repeated in a loop. Press A-B once to select the start position. The display will show A and B will be flashing. Press again at
the desired end position. The display will now show ‘AB’ and the selected music source selection will be continually repeated.
Press A-B again will cancel repeat function.
FUNCT:
When this button is pushed, the media player cycles through its different playback modes as shown below - CD >> USB
>> CARD >> AUX. The FUNCT button is similar to a ‘source’ button on some other devices. These words will appear on
screen to indicate the mode selected.
REPEAT:
In CD Mode - Press REPEAT to repeat playing the current track only. Press repeat a second time to repeat all the
tracks. Press repeat a third time to repeat all tracks in random order. Pressing a fourth time activates “INTRO PLAY” and
pressing a fifth time returns to the normal “PLAY ALL” mode. The words for the various types of repetition will display on
screen as you press REPEAT and cycle through each type.
REPEAT:
In USB/SD/MP3 Mode - Press REPEAT to change the play type to one of the following – REPEAT TRACK >> REPEAT
FOLDER (Album) >> REPEAT ALL >> RANDOM PLAY >> INTRO PLAY >> PLAY ALL. These words will appear on screen to
indicate the Repeat mode selected.
FIND:
For MP3 playback… Press this button to change the search mode from Track / File to Album / Folder. File search is
alphanumeric and the character changes by pressing << or >> or REV or CUE. A special icon will appear on the left side of
the LCD to indicate that FIND has been activated. When FIND is engaged, the playback continues. If no action is taken after
pressing FIND function button, the system reverts to status quo after about 20 seconds.
