PAGING Systems
Detailed instructions on using and setting up the paging feature is avai
lable by selecting the “Help” menu
icon once program has started.
1) Start
RaceWORKS
program
2) Select Paging Setup from the pull down Setup menu item.
3) Click in the Enable Paging check box.
4) Enter 7 Digit Cap Code from back of pager.
5)
Ex: 0109002 (enter the “0”)
6) Click Save.
7) Exit program
8) Start
RaceWORKS
program
9)
Paging will start automatically after 2 minutes
Your Computers Power Saving/Sleep Features
IMPORTANT
: You must turn OFF your Sleep and Power Saving features in order to allow RaceWORKs to
stream live weather information for extended periods of time without stopping. Some computers may have
different features, but in general do the following:
1)
Search for “Power and Sleep Settings”
2)
Set Sleep to
NEVER
for both battery and plugged in.
3)
Go to “Change Advanced Power settings”
a.
Hard Drive
–
Turn off hard disk
–
set to NEVER or 0 minutes
b.
Sleep
–
make sure all off Sleeps Modes are set to (NEVER)
c.
USB settings
–
Selective Suspend (DISABLE)
Pager Instructions
Complete Pager Manual can be downloaded from the Tech Support page of our website.
www.AltronicsInc.com/tech-support
1) Pressing and holding Read button will turn pager on.
2) Pressing Read button will bring up most recent Page
3) Using Left/Right buttons will scroll thru Pages. Left-older Page
4) Up/Done will scroll through current Page.
Pager will show the last 20 pages. Oldest page will automatically get
deleted when new page is received.
Pages can be saved and deleted using the Function button and following
menu icon.
Pager can be turned off using Function button and Pager Off icon.
Holding Function button will turn on Back Light.
